We are using a 4402 Controller and have a WLAN with EAP authentication. That's working just fine. But now we are trying to add a Guest WLAN with WEB authentication. And that also works fine. The thing is we would like to use a proxy server for the guest users, so when a user gets authenticated, we change the proxy settings in the client machine. But, if we reset the machine, we have to erase the proxy configuration, re-authenticate and then configure again the proxy configuration. This makes sense to me, but what can we do so we dont have to erase/reconfigure the proxy settings?
We are using local web authentication by the way, so I think if we use External Web authentication maybe we could work this out, using a web page that is reachable through the proxy. But i don't know if this would work... any word on this issue?
The controller should allow initial proxy communication between browser and proxy server to occur. After the .pac script has sent through the controller will know that following http requests are not longer from the browser application but now from the user, and then the web authentication
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...