Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WGB 350 on lightweight

Does anybody know if the workgroup bridge WGB350 works with the Cisco lightweight radios?? I have one running version 8.89 and I can't get it to work.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: WGB 350 on lightweight

Hi Hector,

Sorry :( this is not supported. Have a look;

Q. Do LWAPP APs support WGB?

A. WGB functionality is only implemented on autonomous IOS APs, not on LWAPP APs.

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps441/products_qanda_item09186a0080094644.shtml#q22

The following Cisco Aironet access points have the ability to operate as autonomous access points or lightweight access points:

Cisco Aironet 1240 AG Series Access Points

Cisco Aironet 1230 AG Series Access Points

Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)

Cisco Aironet 1130 AG Series Access Points

Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)

Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R). A Cisco Aironet 1300 Series operating in LWAPP mode only operates as an access point. This series does not support LWAPP bridging mode.

The LWAPP-capable access points listed above can be ordered configured for lightweight operation, or can be upgraded from autonomous access point mode to lightweight mode using the Autonomous to Lightweight Mode upgrade tool. Orderable access points configured for lightweight operation contain an "LAP" prefix in the part number, such as AIR-LAP1310G-x-K9. Orderable access points configured for autonomous operation contain the standard "AP" prefix, such as AIR-AP1242AG-x-K9, or "BR" in the case of AIR-BR1310G-x-K9.

From this good doc;

http://www.cisco.com/en/US/products/ps6108/prod_bulletin0900aecd80321a2c.html

Hope this helps!

Rob

Please remember to rate helpful posts.....

1 REPLY
Hall of Fame Super Red

Re: WGB 350 on lightweight

Hi Hector,

Sorry :( this is not supported. Have a look;

Q. Do LWAPP APs support WGB?

A. WGB functionality is only implemented on autonomous IOS APs, not on LWAPP APs.

From this doc;

http://www.cisco.com/en/US/products/hw/wireless/ps441/products_qanda_item09186a0080094644.shtml#q22

The following Cisco Aironet access points have the ability to operate as autonomous access points or lightweight access points:

Cisco Aironet 1240 AG Series Access Points

Cisco Aironet 1230 AG Series Access Points

Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)

Cisco Aironet 1130 AG Series Access Points

Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)

Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R). A Cisco Aironet 1300 Series operating in LWAPP mode only operates as an access point. This series does not support LWAPP bridging mode.

The LWAPP-capable access points listed above can be ordered configured for lightweight operation, or can be upgraded from autonomous access point mode to lightweight mode using the Autonomous to Lightweight Mode upgrade tool. Orderable access points configured for lightweight operation contain an "LAP" prefix in the part number, such as AIR-LAP1310G-x-K9. Orderable access points configured for autonomous operation contain the standard "AP" prefix, such as AIR-AP1242AG-x-K9, or "BR" in the case of AIR-BR1310G-x-K9.

From this good doc;

http://www.cisco.com/en/US/products/ps6108/prod_bulletin0900aecd80321a2c.html

Hope this helps!

Rob

Please remember to rate helpful posts.....

184
Views
0
Helpful
1
Replies
CreatePlease to create content