Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WGB350v885.img upgrade fails when following procedure

The upgrade process from WGB350v884 to WGB350v885 appears to be broken. Here is the process being following:

1. run upgrade_patch against a WGB352R running V8.84

>This utility is intended to be used on the Cisco >Aironet 350 Workgroup

>Bridge to prepare it for software upgrade.

>

>PLEASE DO NOT REMOVE POWER IN BETWEEN USING THIS >UTILITY AND PERFORMING

>THE SOFTWARE UPGRADE!!!!

>

>Please proceed with caution, this upgrade process >should only be

>performed if absolutely needed.

>

>Would you like to proceed? (y/n)y

>

>Step 1 complete

>Step 2 complete

>Step 3 complete

>Step 4 complete

>Step 5 complete

>Step 6 complete

>Step 7 complete

>Step 8 complete

>

>Your Cisco Aironet 350 Workgroup Bridge is ready to >be upgraded

>in the usual manner.

>

>PLEASE DO NOT REMOVE POWER IN BETWEEN USING THIS >UTILITY AND PERFORMING

>THE SOFTWARE UPGRADE!!!!

2. Attempt to load the 8.85 software

>1 - Get - Load a >firmware/config file

>2 - Put - Send a >firmware file

>3 - Config - Send a >configuration file

>4 - Dest [ 010.012.010.206 ] - Host IP >address

>5 - Username [ "cfgradio" ] - Host >username

>6 - Password - Host >password

>7 - Filename [ "WGB350v885.img" ] - Host >filename

>

>Enter an option number or name, "=" main menu, <ESC> >previous menu

>>

>220-FileZilla Server version 8.8 final

>220-written by Tim Kosse (Tim.Kosse@gmx.de)

>220 Please visit >http://sourceforge.net/projects/filezilla/

>230 Logged on

>200 Type set to I

>200 Port command successful

>150 Opening data channel for file transfer.

>addr 480000 0 != bed4

>226 Transfer OK

>221 Goodbye

Upgrade dies with the addr 480000 0 != bed4

Can you explain what is wrong with the WGB350v885.img file?

Thanks.

4 REPLIES
Bronze

Re: WGB350v885.img upgrade fails when following procedure

The image could have become corrupt when you first downloaded it. Try downloading the image again.

New Member

Re: WGB350v885.img upgrade fails when following procedure

I have downloaded the image to multiple systems and compared the file to the cisco source.. if the file is corrupt, it is most likely corrupt on the cisco site.

New Member

Re: WGB350v885.img upgrade fails when following procedure

I'm having the exact same problem... I've tried downloading the image file a couple times, but I keep getting the addr 4800000 0!=bed4 message. Were you ever able to figure it out?

New Member

Re: WGB350v885.img upgrade fails when following procedure

Still no resolution. I still believe this is a corrupt cisco image, I have been doing upgrades on these wgb350's for years and never had this problem until this image.

106
Views
0
Helpful
4
Replies
CreatePlease login to create content