Which network ip address will my mobile clients receive
I have an AP in my production site which has a vlan configured as native vlan and the ssid related to this vlan is being used for communication with other wireless bridges. The BVI interface of this AP is ofcourse having an IP of the native vlan.
Now I have a requirement of configuring this AP with mobile clients and these mobile clients should get IP addresses from the DHCP server. The IP address that these mobile clients should recieve is from a network which is different from that of the native vlan.
I know that I can define this new vlan in the APs as wellas everywhere in the network aswell as create a SSID binded to this VLAN, But I had this doubt in my mind if the client will really take the IP of the VLAN which I want or it will try to get an IP address of the VLAN to which the BVI interface belongs i.e. the native vlan.
Note:- The Client will be associated to the AP through the desired VLAN and not through the SSID of the native vlan.
I wanted to have your expert opinion before rolling this out in production.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...