09-12-2013 11:05 AM - edited 07-04-2021 12:49 AM
After a building power outage our wireless network is asking for a username and password to connect to the wifi, does anyone know how to disable the username and only have it ask for the password?
Our wireless is a Cisco 2106 with 4 access points.
Thanks in advance.
Solved! Go to Solution.
09-12-2013 11:41 AM
Hi John,
What sort of authentication are you using for the problem ssid? Please verify if the authentication methods was charged after reboot?
Regards
Najaf
Sent from Cisco Technical Support iPad App
09-12-2013 11:40 AM
Can you post the show run-config on the controller ..
__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
09-12-2013 11:41 AM
Hi John,
What sort of authentication are you using for the problem ssid? Please verify if the authentication methods was charged after reboot?
Regards
Najaf
Sent from Cisco Technical Support iPad App
09-12-2013 02:28 PM
The issue has been solved. Thank you for your repsonses. We found that the security policy had been changed from the power outage. Setting it back to PSK fixed the issue.
Thanks!
09-12-2013 07:53 PM
Thanks for using the rating system...
Good to hear things are working as expected.
Regards
Najaf
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide