No, Normal wired guest user (like wireless guest users, we can create wired guest users traffic send to a anchor controller & then get an IP in a guest-lan configured on that)
My test setup is simple & having single WLC. I have crated a Guest LAN on a 4402 controller with vlan 139 as ingress (purly L2 & no gateway defined) & egress interface as vlan 130 (proper L3 gateway & DHCP defined)
When a PC put into vlan 139 switch port it is getting IP from vlan 130 as expected . Can browse with web pass through as I configured L3 security like that. I would like to know whether I could get multicast working for this wired guest user.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...