Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wireless access point 1041

I have a wireless network using the cisco ap 1041 converted into the anonymous. however it seems like every morning or evening I have to attached it back to the SSID all over again. it will not give me an ip address. I also would have to put the encryption key in again. I am using WEP 40 bit. Has anyone experience this issue before?

Sent from Cisco Technical Support iPad App

Everyone's tags (1)
4 REPLIES

Re: wireless access point 1041

Not an issue I've seen. But I don't run WEP as it I easily cracked.

I'd switch to WPA/WPA2 personally

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

wireless access point 1041

I want to ask about 1041 AP too.

How much maximum SSID's it can support? There is no information in datasheets

Maybe 16 SSID's as 1142 AP?

Thanks!

Re: wireless access point 1041

All Cisco AP support a maximum of 16 SSID. Though I would not recommend going beyond 3-4. Other wise you create your own interference.

Steve

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

Re: wireless access point 1041

Are u sure u save config after u do configuration?

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"
545
Views
0
Helpful
4
Replies
CreatePlease login to create content