I have a 6506 with an integrated Wism. Is there a way to do a "show inventory" that allows me to see all the serial numbers of my APs. I would like to see it in a list format so I could copy paste it into a spreadsheet. Any other methods?
I don't have cisco works.
Any Clues would be greatly appreciated!!
do you have WCS? You can pull an inventory list from WCS.
You know you can get a 30 day demo from Cisco
so drop into the CLI of the controller and do:
>show ap summary
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
------------------ ----- ------------------- ----------------- ---------------- ---- ------- ------
XX-4-215-1142 2 AIR-LAP1142N-A-K9 c4:7d:4f:3a:1c:xx default location LAG US 1
XX-4-105-1142 2 AIR-LAP1142N-A-K9 c4:7d:4f:3a:bc:xx default location LAG US 1
XX-4-406-1142 2 AIR-LAP1142N-A-K9 c4:7d:4f:3a:1d:xx default location LAG US 1
XX-4-221-1142 2 AIR-LAP1142N-A-K9 c4:7d:4f:3a:1c:xx default location LAG US 1
If you find this helpful, please be so kind and rate helpful post !
EDIT -- Wait you want serial number right ! BRB
(WiSM-slot7-1) >show ap inventory XX-2-307B-1142
NAME: "Cisco AP" , DESCR: "Cisco Wireless Access Point"
PID: AIR-LAP1142N-A-K9 , VID: V01, SN: FTX14XXXXX
NAME: "Dot11Radio0" , DESCR: "802.11N 2.4GHz Radio"
PID: UNKNOWN, VID: , SN: FOC1XXXXXXX
NAME: "Dot11Radio1" , DESCR: "802.11N 5GHz Radio"
PID: UNKNOWN, VID: , SN: FOC1XXXXXX
Only problem is you have to do 1 ap at a time ... Still checking if there is a command you can list it out ...
No, have you ?
We just took delivery of 325 (3502 Clean Air APs).
Cut-down version of the 1140 but 50% cheaper (retail) compared to the 3500i.
Wow. That's alot of 3500! He he he ...
Yea, i heard that as well.. But they dont do clean air right ? And they are 2x2s, no ?
Sorry bud i dont see a command that list out the serial numbers:
It would be easier to drop into the gui and look them up there OR download a 30 day WCS trial and you can pull an inventory report.