Re: Wireless authentication using Safeword/RSA tokens
I use the lightweight solution with 1131ag and 4402 WLC, but the basics are the same. You need a client supplicant that can do one time use tokens. The windows zero configuration client does not support one time use tokens. I use the Juniper Odyssey client, but you could just as well use the Cisco ACS client. Even the old Cisco Aironet PEAP supplicant will do the trick (albeit unsupported). Both supplicants can be downloaded for a 30 day trial if you want to check it out.
I have the WLAN setup to authenticate to a ACS Radius server and use WPA2. The client is setup to use PEAP, with one time use hardware token.
Hope this helps. If you want more details, let me know.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...