Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wireless bridge can't access windows certificate server

We have 10 Cisco 1200 wireless APs. The VLAN 1 use Windows certificate as authentication and VLAN 100 for the public. They work fine. We just bought two 1310 wireless bridges for outdoor use. We contact Cisco support for setup these two bridges. The wireless can receive the signal but can't logon. The IP is 169.254.x.x. The Certificate server receive Event ID 2 as below. The Cisco engineer can't make it work and he said the setup Windows IAS is not his expertise. Any suggestions how can we fix this issue?

Event Type: Warning

Event Source: IAS

Event Category: None

Event ID: 2

Date: 4/13/2007

Time: 7:41:21 PM

User: N/A

Computer: DEVICES


User blin was denied access.

Fully-Qualified-User-Name = Lin

NAS-IP-Address =

NAS-Identifier = Outdoor_1300_2

Called-Station-Identifier = <not present>

Calling-Station-Identifier = <not present>

Client-Friendly-Name = Root Bridge1

Client-IP-Address =

NAS-Port-Type = Async

NAS-Port = <not present>

Proxy-Policy-Name = Use Windows authentication for all users

Authentication-Provider = Windows

Authentication-Server = <undetermined>

Policy-Name = All

Authentication-Type = PAP

EAP-Type = <undetermined>

Reason-Code = 66

Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy.

For more information, see Help and Support Center at


0000: 00 00 00 00 ....