Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wireless Bridge design question.

I like to design one fixed root-bridge and shiftable non-root bridge.

The root bridge have Omni antenna and non-root bridge also have omni antenna. but important issue is non-root bridge is installed in the bus. bus is moving around in root-bridge's omini antenna coverage.

I like to know this design is available?

and second question is roaming issue.

over 100km/h moving client is able to roamming without signal loss between access points?

1 REPLY
Cisco Employee

Re: Wireless Bridge design question.

This is a pretty standard sort of design, from a toplogolgy point of view it does not matter the non root is in the bus

From a roaming point of view it gets a lot more complex.

At 100Klm/hr dopler shift *may* affect your signal quality.

You will also need the 'fast roaming' feature in the latest IOS version. I do not believe this has been included in the latest VxWorks version so this may cause you an issue.

High speed application have been done in the past but there is a number of challenges, your account team will be able to help you through these.

This is not a standard application so I strongly recommend that you work with your Cisco account team on this.

118
Views
0
Helpful
1
Replies
CreatePlease to create content