cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1566
Views
0
Helpful
6
Replies

Wireless clients dropping

dbuckley77
Level 1
Level 1

we have a 4402 wlc with airlap1142 APS and clients are intermittently dropping with good rssi and snr.  need asitance

6 Replies 6

Leo Laohoo
Hall of Fame
Hall of Fame

Post the output to the command "debug client <client MAC address>" when the event happens.

I am thinking there may be too many clients on the AP.  I logged into the controller and saw 21 clients associated with it.  I looked in the controller under mac filtering and it looks like I can filter on MAC by SSID but I'm not seeing an option to filter by AP.  Is there a way to do mac filtering by specific IP or some other way I can isolate the number of clients connecting to the AP?

I will try to post the output of the debug later.

logged into the controller and saw 21 clients associated with it.

That's nothing.  I've got APs that regularly have about 45 to 75 wireless clients.  Daily.

I ran the debug command on the client mac and watched it for a while but no output.

Is there somehwere in the controller where I can see traffic stats for each AP?  I'm not seeing it.

Is this issue with a specific AP? When this issue happen, all users are affected at same time or its random?

 

Review Cisco Networking products for a $25 gift card