Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Wireless connection for Palm Tungsten C PDA

Does Cisco AP 350, 1200 and ACS support Palm Tungsten C PDA built-in 802.11 technology? If yes, how do I setup AP 350, 1200 and ACS to authenticate PDA.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Wireless connection for Palm Tungsten C PDA

The Cisco AP will support any WiFi certified client.

The Palm shows as wifi certified so it will work fine

As to what authentication methods it supports you will have to check with the palm documentation but at very least you can run static WEP

If it supports 802.1x then you can run EAP or you maybe able to use a 3rd party suplicant such as meeting house to run EAP

As far as configuration for the AP it is just the same as for any other client device

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/index.htm

2 REPLIES
Cisco Employee

Re: Wireless connection for Palm Tungsten C PDA

The Cisco AP will support any WiFi certified client.

The Palm shows as wifi certified so it will work fine

As to what authentication methods it supports you will have to check with the palm documentation but at very least you can run static WEP

If it supports 802.1x then you can run EAP or you maybe able to use a 3rd party suplicant such as meeting house to run EAP

As far as configuration for the AP it is just the same as for any other client device

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/index.htm

Community Member

Re: Wireless connection for Palm Tungsten C PDA

Hi,

Did you success in connect tungsten C on AP350 ? i have some difficulties even in Open mode with no WEP (insfrastructure and ad-hoc mode)... There is no connection at all whereas i have 1 with an avaya card in ad-hoc mode ...

Stephane.

227
Views
0
Helpful
2
Replies
CreatePlease to create content