Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Wireless controller: can it use Dynamic Interface to discover APs?

Does the controller only use the management interface to discover and control APs?

In my case I created a dynamic Interface on the controller and it's in a different network than the management interface. The AP (which gets IP from a DHCP server) is in the same network with the dynamic interface. However the AP can't find the controller...

Is there anyway to make the AP be able to find the controller through the dynamic interface or it's totally impossible?

Thanks a lot!

Difan

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Wireless controller: can it use Dynamic Interface to discove

The dynamic interfaces are tied to the wlans for client access and the APs associate through the ap manager interfaces.

2 REPLIES
Cisco Employee

Re: Wireless controller: can it use Dynamic Interface to discove

The dynamic interfaces are tied to the wlans for client access and the APs associate through the ap manager interfaces.

New Member

Re: Wireless controller: can it use Dynamic Interface to discove

Thanks a lot!

167
Views
0
Helpful
2
Replies