I have a small site that needs wireless access and a router. I am uncertain if I should use the 851 router with integrated wifi or go with a router and a separate 1130 access point. any suggestions on how I should choose?
Likly you have an idea of where your router is going to be placed... Maybe in a designated rack/room/table etc. Well that location may not be best suited for the job or for RF... IE if your 'computer room' is in one corner of the building and your users are in the opposite corner, you may not have the best coverage or any coverage at all... You will then end up either buying another AP or running a series of network cables to your router.
Likly your best bet is to go with 2 devices as to be more flexable.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...