Wireless Guest Net

[ppellettiere]

We are running a 4400 - Version 4.2.176 for our guest network.

My question is Does the Web authentication/Login  page have to

be  secure https? Can it be http? 

[Sebastian Helmer]

Hi,

I would say it is possible, I found an idea here:

"

If you have HTTPS enabled on the controller the webauth login page  should use SSL.  Just go under Management - HTTP and make sure you have  HTTPS enabled.  If you don't have it enable the webauth page would not  be encrypted.

"

From:

https://supportforums.cisco.com/message/3121202#3121202

regards,

Sebastian

[ppellettiere]

Sorry that didn't work I still have to use https...

[Sebastian Helmer]

maybe my mistake, do you have http also enabled?

my post was just an example for the other case, to just https in case of http..

- Sebastian

[Scott Fella · Accepted solution]

I just tested that in my lab and you need to enable http and disable https on the management http-https configuration tab.  I had to reboot the WLC in order for it to work, but that might be because I also regenerated the certificate.

[ppellettiere]

I will try this after hours in case I have to re-boot.

[ppellettiere]

That Worked Thank You.