Wireless Ineterface IP Addressing

[ttuisawau]

Hello,

I have a CISCO 1300 series (ios) AP.I would like to give the radio bridge and the Fastetherenet interface sepertae IP's.I am running DHCP on our network and would like the clients connected to the ethernet of the 1300 to pick IP addresses that are on a different subnet from that of the radio.It is currently configured as a bridge to connect back to HQ and the clients are picking up IP's on the same subnet of the HQ because of this.

ANy help on this would be appreciated.

Thanks

[mchin345]

This URL should help you:

http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008019e74e.shtml