Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Wireless LAN Controller support lightweight access point 1242 over wireless

Cisco Wireless LAN Controller 4402 can support lightweight access point 1242 over wireless backbone or need ethernet connection?

1 REPLY
Hall of Fame Super Silver

Re: Wireless LAN Controller support lightweight access point 124

You can have a LAP 1242 on the opposite end of a wireless backbone, either running in H-REAP or Local, depending on the bandwidth of the backbone. There are minimum requirements for H-REAP ap's.

For H-REAP's connected to a centralized wireless LAN controller, the WAN link must support a minimum speed of 128-kbps WAN throughput and 100-ms maximum roundtrip latency between each H-REAP and the wireless LAN controller.

Here is a link.

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/prod_white_paper0900aecd804f1a23_ns337_Networking_Solutions_White_Paper.html

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807cc3b8.shtml

-Scott
*** Please rate helpful posts ***
837
Views
0
Helpful
1
Replies
CreatePlease to create content