Wireless LAN Controllers for more that 6 waps

[luthierone]

Hi Guys,

Is there any way to use multiple 2000 series controllers together to controller more than 6 waps? Or do I have to upgrade to a 4400 series?

thanks

[ankbhasi]

Hi Friend,

Single 2006 can control only 6 AP and there is no way you can cluster more than 1 2006 together.

So only option left with you is 4402 or 4404 controller.

HTH

Ankur

*Pls rate helpfull post

[luthierone]

Thanks friend,

That answers my question.

[magress]

Hello,

You can configure multiple 2006 controllers in the same mobility group with the same virtual IP address. The 2006s will need to be connected to a switch. This is a very common deployment. However, you will have a different point of management for your second set of 6 access points - unless you have WCS.

The same scenario exists when customer need 50/100+ AP support and use multiple 4400 series controllers.

Please see the following url for additional information:

http://cco/en/US/products/ps6366/products_configuration_guide_chapter09186a008076cf0a.html

Thanks,

Mark

[luthierone]

Thanks! I thought it could be done with mobility groups. I have been sitting on this one for a while.