Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Wireless LAN Controllers for more that 6 waps

Hi Guys,

Is there any way to use multiple 2000 series controllers together to controller more than 6 waps? Or do I have to upgrade to a 4400 series?

thanks

4 REPLIES
Cisco Employee

Re: Wireless LAN Controllers for more that 6 waps

Hi Friend,

Single 2006 can control only 6 AP and there is no way you can cluster more than 1 2006 together.

So only option left with you is 4402 or 4404 controller.

HTH

Ankur

*Pls rate helpfull post

New Member

Re: Wireless LAN Controllers for more that 6 waps

Thanks friend,

That answers my question.

New Member

Re: Wireless LAN Controllers for more that 6 waps

Hello,

You can configure multiple 2006 controllers in the same mobility group with the same virtual IP address. The 2006s will need to be connected to a switch. This is a very common deployment. However, you will have a different point of management for your second set of 6 access points - unless you have WCS.

The same scenario exists when customer need 50/100+ AP support and use multiple 4400 series controllers.

Please see the following url for additional information:

http://cco/en/US/products/ps6366/products_configuration_guide_chapter09186a008076cf0a.html

Thanks,

Mark

New Member

Re: Wireless LAN Controllers for more that 6 waps

Thanks! I thought it could be done with mobility groups. I have been sitting on this one for a while.

171
Views
0
Helpful
4
Replies
CreatePlease to create content