Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wireless radio power

I have a customer currently is using 23 linksys routers acting as access points, those radios were software modified and are giving 250mW of power. They want replace those radios by a Cisco Solution, what do you sugest..thanks.

3 REPLIES
New Member

Re: wireless radio power

I suggest reducing power to spec (for several reasons)

1. Increasing the power (esp. in higher density environments) only serves to increase the background noise, decreasing SNR for everyone.

2. Increasing AP power does no good if the client devices are unable to get a signal back to the AP (if your client is 30mW omni there is little advantage to having the AP operate at a higher power).

New Member

Re: wireless radio power

hi, i forgot tell you, the country is not US, is in south america, where there is not regulations or are pedding for regulations.

The current solution is provided by other company via a rental contract.

The customer want change to a cisco solution ..

thanks

Re: wireless radio power

First thing to do is a site survey using Cisco APs (preferably with all the Linksys kit powered off). Without a survey any advice would be pure guesswork.

131
Views
0
Helpful
3
Replies