I'm configuring multicasting on one (out of five) of my customers SSIDs (multicasting is configured on the wired LAN, so I'm using multicast mode for multicast forwarding).
Currently we're mainly using /23 and /22 to accomodate wireless clients, but I'm considering to reduce that size on this specific subnet to /24 in combination with VLAN select because of the implementation of multicasting in this voice WLAN.
Because of the following sentence in the 7.2 configuration guide, I'm wondering if I have to reduce the subnet size on all VLANs (bound to the other non multicast WLANs) too?
Access points in the multicast group receive the packet and forward it to all the BSSIDs mapped to the interface on which clients receive multicast traffic. From the access point perspective, the multicast appears to be a broadcast to all SSIDs.
Any suggestions on how to interpret that sentence (or how wrong I am )?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...