Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wism-2 and a IDSM-2 in a 6509 Chassis

Has anyone configured the Wism-2 with an IDSM-2?

In need to place the wireless users thru the IPS inline

  1. How would you configure the IDSM-2 to place the VLAN’s for the SSID’s of the WiSM-2 thru the IDSM-2 inline?
  2. What would be the best, inline VLAN pairs or VLAN groups?

 

Any help would be greatly appreciated.

 

 

 

8 REPLIES
Hall of Fame Super Silver

Wism-2 and a IDSM-2 in a 6509 Chassis

Your question would be best answered in this forum:

https://supportforums.cisco.com/community/netpro/network-infrastructure/switching

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
New Member

You did not help at all by

You did not help at all by asking me to ask in another post. seems all the forums are tied together.

So which is it. is the wireless, security, and switching forums are seperate or not?

Either way answer the question only if you know the answer please!

This is still unanswered!

Hall of Fame Super Gold

This scenario is unique by

This scenario is unique by itself.  This is the reason no one can provide any information.  Not a lot of people know about or have deployed an IDSM.  


Your best bet is to open a Cisco TAC Case. 

New Member

Leo, TAC is Break / Fix.Not

Leo, TAC is Break / Fix.

Not sure why you want to comment?

 

Hall of Fame Super Silver

TAC will be your only hope. 

TAC will be your only hope. 

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Gold

Leo, TAC is Break / Fix.I

Leo, TAC is Break / Fix.

I disagree.  Break/Fix/RMA is just one of it's function.  TAC can very well do configuration assistance and troubleshooting.  

 

The only thing TAC won't do, as far as I'm aware, is verify a design.  

New Member

Yes duplicate posts for some

You did not help at all by asking me to ask in another post. seems all the forums are tied together.

So which is it. is the wireless, security, and switching forums are seperate or not?

Either way answer the question only if you know the answer please!

This is still unanswered!

Hall of Fame Super Silver

 IDSM-2 in IPS modeThis is

 IDSM-2 in IPS mode

This is not a wireless question.  People on the mobility forum is strictly for wireless.  If you have a question on the WiSM2, we can help, but since your question is tied to the IDSM, you need to ask in the security forum.  If they can't help you, then open a TAC case.

-Scott
*** Please rate helpful posts ***
91
Views
5
Helpful
8
Replies
CreatePlease to create content