08-17-2006 05:29 AM - edited 07-04-2021 12:52 PM
We have on Wism version 4.0.155.5. We configured one RF group name for two controllers in the wism and use auto-RF. The problem is each controller can only see itself in the RF group and consider itself as the RF group leader. My understanding is each one should see two controllers in the RF group and only one should be the RF group leader. Where could be wrong?
08-20-2006 02:11 PM
I may be wrong on this, but I believe the RF groups are actually determined based on what the radios can hear. So an RF group is created for each group of isolated cells (i.e. group of AP's that hear each other within a coverage area).
08-21-2006 01:41 PM
Do you have APs on both WiSMs yet? They will only see other RF group members that have APs associated to them. I had the same issue, but when I moved 1 AP to each WiSM the RF group came up as expected.
08-22-2006 06:26 AM
Yes that is helpful! Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide