Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

WISM and RF Group

We have on Wism version 4.0.155.5. We configured one RF group name for two controllers in the wism and use auto-RF. The problem is each controller can only see itself in the RF group and consider itself as the RF group leader. My understanding is each one should see two controllers in the RF group and only one should be the RF group leader. Where could be wrong?

3 REPLIES
Community Member

Re: WISM and RF Group

I may be wrong on this, but I believe the RF groups are actually determined based on what the radios can hear. So an RF group is created for each group of isolated cells (i.e. group of AP's that hear each other within a coverage area).

Silver

Re: WISM and RF Group

Do you have APs on both WiSMs yet? They will only see other RF group members that have APs associated to them. I had the same issue, but when I moved 1 AP to each WiSM the RF group came up as expected.

Bronze

Re: WISM and RF Group

Yes that is helpful! Thanks!

143
Views
0
Helpful
3
Replies
CreatePlease to create content