The limit is not so much on the WISM as the Access points, most access points support 8 per radios (some 12), but older ones may support less I don't remember specifically. That aside though it is best practice to limit the number of SSID's since they increase the beacons, and overall overhead of the system. I shy away from more than 4 unless there is an absolute need for them.
This really is one of those "it depends on versions" answers. Different AP's and different controller codes have different support. As of 6.0 you can create up to 512 WLANs on the controller but only 16 WLANs can be broadcast from an AP.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...