Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WISM Bug

Yesterday

We have two WiSM modules on our 6513 and we made the upgrade from Cisco IOS Version 122-18.SXF10a to new code version 122.33.SXI3 but after that upgrade we could see that WiSM configuration was modified.

From SXF10a

wism module 12 controller 1 allowed-vlan 21,41,61,94,120-125,221,261

wism module 12 controller 2 allowed-vlan 20,22,40,42,60,62,94,1002-1005

wism module 12 controller 2 allowed-vlan 120-125,220,222,260,262

wism module 13 controller 1 allowed-vlan 23,24,43,44,63,64,94,1002-1005

wism module 13 controller 1 allowed-vlan 120-125,223,224,263,264

wism module 13 controller 2 allowed-vlan 25,45,65,94,120-125,225,265

wism module 12 controller 1 native-vlan 94

wism module 12 controller 2 native-vlan 94

wism module 13 controller 1 native-vlan 94

wism module 13 controller 2 native-vlan 94

To SXI3

wism module 12 controller 1 allowed-vlan 21,41,61,94,120-125,221,261

wism module 12 controller 2 allowed-vlan 20,22,40,42,60,62,94

wism module 12 controller 2 allowed-vlan 120-125,220,222,260,262

wism module 13 controller 1 allowed-vlan 23,24,43,44,63,64,94

wism module 13 controller 1 allowed-vlan 120-125,223,224,263,264

wism module 13 controller 2 allowed-vlan 25,45,65,94,120-125,225,265

wism module 12 controller 1 native-vlan 94

wism module 12 controller 2 native-vlan 94

wism module 13 controller 1 native-vlan 94

wism module 13 controller 2 native-vlan 94

But I saw that two WLC "module 12 controller 2" and "module 13 controller 1" was disable and after I put that configuration

again on 6500 chassi some vlans was allocated again but always that I need to reboot that controller it's lost allocated vlans.

Was not that bug solve?

502
Views
0
Helpful
0
Replies
CreatePlease to create content