Yesterday
We have two WiSM modules on our 6513 and we made the upgrade from Cisco IOS Version 122-18.SXF10a to new code version 122.33.SXI3 but after that upgrade we could see that WiSM configuration was modified.
From SXF10a
wism module 12 controller 1 allowed-vlan 21,41,61,94,120-125,221,261
wism module 12 controller 2 allowed-vlan 20,22,40,42,60,62,94,1002-1005
wism module 12 controller 2 allowed-vlan 120-125,220,222,260,262
wism module 13 controller 1 allowed-vlan 23,24,43,44,63,64,94,1002-1005
wism module 13 controller 1 allowed-vlan 120-125,223,224,263,264
wism module 13 controller 2 allowed-vlan 25,45,65,94,120-125,225,265
wism module 12 controller 1 native-vlan 94
wism module 12 controller 2 native-vlan 94
wism module 13 controller 1 native-vlan 94
wism module 13 controller 2 native-vlan 94
To SXI3
wism module 12 controller 1 allowed-vlan 21,41,61,94,120-125,221,261
wism module 12 controller 2 allowed-vlan 20,22,40,42,60,62,94
wism module 12 controller 2 allowed-vlan 120-125,220,222,260,262
wism module 13 controller 1 allowed-vlan 23,24,43,44,63,64,94
wism module 13 controller 1 allowed-vlan 120-125,223,224,263,264
wism module 13 controller 2 allowed-vlan 25,45,65,94,120-125,225,265
wism module 12 controller 1 native-vlan 94
wism module 12 controller 2 native-vlan 94
wism module 13 controller 1 native-vlan 94
wism module 13 controller 2 native-vlan 94
But I saw that two WLC "module 12 controller 2" and "module 13 controller 1" was disable and after I put that configuration
again on 6500 chassi some vlans was allocated again but always that I need to reboot that controller it's lost allocated vlans.
Was not that bug solve?
