09-02-2010 03:20 PM - edited 07-03-2021 07:08 PM
Cisco ap 1131's seem to be ignoring the option 43 in the dhcp scope. Therefore they aren't attaching to the WiSM slot1-1. Any suggestions?
09-02-2010 03:42 PM
Yes. Give us more information.
1. What is the error message when you console into the AP that's searching for the WLC?
2. Have you tried using the DNS entry?
3. What is the firmware of your WiSM?
4. Is your firewall setup correctly to allow the right ports to go through?
09-03-2010 07:43 AM
The Sup720 mod is running Version 12.2(17r)SX7
The WiSM is running version 6.0.196.0
I have not consoled into an AP yet as it is a remote site. Hoping to get there today
to do that.
I believe the firewall is set with the correct port, but need to double check.
How do you setup the use of the DNS entry?
Thank You for you help.
Pola
Pola
09-03-2010 10:11 AM
Console of AP:
CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
Pola
09-03-2010 04:48 PM
Can you provide more details like what the topology looks like ? You mention a firewall, etc ...
You can also console into an AP and watch the join process. Also run debug CAPWAP to watch the controller side.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide