Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WISM module - spanning tree activation

Because WISM module support LAG protocol over its 4 gigabit links (will be seen by only 1 link), I don't think I have to activate the spanning tree over those.

Am I right, any others considerations for that ?

2 REPLIES

Re: WISM module - spanning tree activation

No, you don't need to turn on SPT on these links. One other consideration to keep in mind, is that this is a module running in your core, and it is recommended that you do VTP exclusions for non-wireless VLANs.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Silver

Re: WISM module - spanning tree activation

To add to this, Cisco also recommends enabling "spanningtree portfast" on the port-channel interface.

- Eric

162
Views
5
Helpful
2
Replies