Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wism occur strange message on management log

Hi there,

I got the strange messages on my wism(v4.1.158.0)

Jul 03 14:41:24.148 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:1a:70:a6:b9:fe

Jul 03 14:41:22.821 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:18:39:0b:93:04

Jul 03 14:41:22.820 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:18:39:0b:93:04

Jul 03 14:41:21.618 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e

Jul 03 14:41:21.601 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e

Previous message occurred 2 times.

Jul 03 14:41:21.600 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e

Jul 03 14:41:19.698 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e

Jul 03 14:41:19.688 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e

Previous message occurred 2 times.

Jul 03 14:41:19.687 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:16:b6:92:d1:1e

Jul 03 14:41:19.300 apf_foreignap.c:1246 APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on MSCB. MSCB still in init state. Address:00:1a:70:a6:b8:ff

And the clients have the MAC on the log couldn't forward any packet to the network.

I couldn't find any idea on the CCO.

Do you have any idea about this message?

regards,

Jongkwan

2 REPLIES
Hall of Fame Super Silver

Re: wism occur strange message on management log

Found this.... Might help hopefully, but its just a brief description, but at the end, of course.... call TAC

Error Message %APF-1-REGISTER_IPADD_ON_MSCB_FAILED: Could not Register IP Add on

MSCB. [chars]. Address:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Explanation Could not Register IP Add on MSCB.

Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Search for REGISTER_IPADD_ON_MSCB_FAILED

http://www.cisco.com/en/US/docs/wireless/controller/message/guide/msgs2.html

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: wism occur strange message on management log

The code you are running isn't on CCO anymore, at least I can't find it on the WiSM. If you don't have any MESH, then you should upgrade to 4.1.185. If you have 1252's then 4.2.130.

-Scott
*** Please rate helpful posts ***
505
Views
0
Helpful
2
Replies
CreatePlease login to create content