I am walking into a site that already has the WISMs setup. There are 2 switches setup with VSS and there are a total of 4 WISMs. When I do a show wism status there are 3 of the service ports that show down. One port down on one of the WISMs and both ports down on another. The managment addresses are setup and I can mange the WISMs and when I do a show int on any of the interfaces they show as 'notconnect'.
I don't think you can go in and do a "no shut" on the ports so not sure what to do in order to get the service ports up.
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
email@example.com. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...