Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wism software upgrade

I plan to upgrade my WiSM to the latest software version(v4.1.181.0). Is there any recommended procedure to upgrade the WiSM?I am running version s72033-ipservicesk9-mz.122-18.SXF5 on my cisco 6509-E sup720. thanks

2 REPLIES
Hall of Fame Super Red

Re: wism software upgrade

Hi Amanuel,

Here is some info to get you started with this Upgrade process;

Q. I plan to upgrade my WiSM to the latest software version. Is there any recommended procedure to upgrade the WiSM?

A. A WiSM upgrade follows the same procedure involved in the upgrade of a 4400 Series Controller. Since a single WiSM module contains two 4400 controllers in it, you need to individually upgrade both WiSM controllers.

From this good Q & A doc;

http://www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item09186a00806e39b7.shtml#upgrade

Wireless LAN Controller (WLC) Software Upgrade to Versions 3.2, 4.0, and 4.1

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

Hope this helps!

Rob

New Member

Re: wism software upgrade

You need to read the release notes that are available in the same download section as the software image. I upgraded 6 WiSM cards yesterday to the latest 4.1 code and everything is working well.

704
Views
0
Helpful
2
Replies