Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Wism Supports Hybrid Mode?

I'm wondering if any ones knows if the WISM blade supports Hybrid Mode on a 6509 or is Native Mode the only way to run WISM. Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Wism Supports Hybrid Mode?

Hi Friend,

WISM blade is not supported in Hybrid mode and Native mode is the only way to make it work in 6509 chassis.

It requires at least: 12.2(18)SXF2 and later.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2856861

HTH

Ankur

*Pls rate all helpfull post

1 REPLY
Cisco Employee

Re: Wism Supports Hybrid Mode?

Hi Friend,

WISM blade is not supported in Hybrid mode and Native mode is the only way to make it work in 6509 chassis.

It requires at least: 12.2(18)SXF2 and later.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2856861

HTH

Ankur

*Pls rate all helpfull post

108
Views
0
Helpful
1
Replies