Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

wism upgrade failure

I try to upgrade a WS-SVC-WISM-1-K9 from 3.2.116.21 to 4.0.155.0 (SWISMK9-4-0-155-0.aes)

which fail with this error:

Tue Jun 13 14:36:41 2006: tftp rc=0, pHost=1.2.3.4 pFilename=wifi/SWISMK9-4-0-155-0.aes

pLocalFilename=/mnt/download/local.tgz

Tue Jun 13 14:36:41 2006: tftp = 6, file_name=wifi/SWISMK9-4-0-155-0.aes, ip_address=1.2.3.4, msg=Unknown error - refer to log

Tue Jun 13 14:36:41 2006: upd_get_code_via_tftp = 6 (target=268435457 msg=Unknown error - refer to log)

Tue Jun 13 14:36:41 2006: RESULT_STRING: TFTP receive complete... extracting components.

Tue Jun 13 14:36:41 2006: RESULT_CODE:6

TFTP receive complete... extracting components.

Tue Jun 13 14:36:43 2006: Still waiting! Status = 2

Tue Jun 13 14:36:45 2006: RESULT_STRING: TFTP Failure while storing in flash!

The msglog:

(WiSM-slot7-1) >show msglog

Message Log Severity Level ...................... VERBOSE

Tue Jun 13 14:36:45 2006 [ERROR] installpkg.c 1036: Footer offset (27722300) past end of file (4538368 bytes)

Is there a solution for this?

1 REPLY
Silver

Re: wism upgrade failure

Could you try loading the image once again.Check if the image is corrupted ,if so try downloading a new image.Check the ip address of the TFTP server also.

368
Views
0
Helpful
1
Replies
CreatePlease to create content