Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

wlan controller

whats the trick to do TFTP BACKUP? It seems not to like my regular tftp client...

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: wlan controller

Here is a screenshot to upload a config file to a tftp server. See attached file.

7 REPLIES
Silver

Re: wlan controller

make sure you are doing the "upload from controller" not "download to controller".

Also, make sure your file path is "/".

The TFTP prompt doesn't take a format of "c:/....."

Other than that, it should work.

can you tell us what your exact configuration for tftp looks like ( from the controller gui)?

New Member

Re: wlan controller

you hit it on the head the issue is in the formatting and also someone said the cliend has to be tftp32d

New Member

Re: wlan controller

also beneate the path is file name so what to put there?

Silver

Re: wlan controller

tftpd32 is good when doing the downloads of software code. Some TFTP clients don't handle files larger than like 32MB. Thats why tftpd32 is usually suggested.

As for filename, if you are uploading the configuration to the tftp server (to backup), I suppose this is just where you say what you want the filename saved as.

New Member

Re: wlan controller

good info, anyone have a screen shot of the tftp page with an example of a good path and filename?

New Member

Re: wlan controller

Here is a screenshot to upload a config file to a tftp server. See attached file.

New Member

Re: wlan controller

Hi d-berlinski


Did you use tftp32 or wich one?


Currently I have the problem when I write  the File Path in order to upload a file AIR-WLC2100-K9-6-0-188-0.aes to controller

I tried with TFTP desktop,and solarwinds  I put file in c:/, in the FIle Path field I wrote / (base on the example shown in config guide file)
in file name field  the name of the file; but it did not work.


I will try with \ in file path base on your example..

regards

330
Views
5
Helpful
7
Replies
CreatePlease to create content