Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WLAN Override

I have setup WLAN override on a 4400 controller with 4.X code version before but how do you do this with 6.X code?

1 REPLY
Hall of Fame Super Red

Re: WLAN Override

Hi,

In newer WLC versions like 6.x, WLAN Override has been  replaced with the "AP Groups" feature;

Creating Access Point Groups

After all access points have joined the controller, you can create up to 150  access point groups and assign up to 16 WLANs to each group. Each access point  advertises only the enabled WLANs that belong to its access point group. The  access point does not advertise disabled WLANs in its access point group or  WLANs that belong to another group.

http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/c52wlan.html#wp1128591

Hope this helps!

Rob

PS:There is a nice video/nugget from George here;

http://www.my80211.com/cisco-wlc-labs/

467
Views
0
Helpful
1
Replies
CreatePlease to create content