I have several 1142LAPs that I have configured as HREAPs. There are several WLANs configured for the LAPs. One of them is for guest access and is configured to use Web Authentication. This means that it should authenticate with the WLC and then proceed to switch traffic locally. If I counfigure the WLAN as non-local-switching, it works fine. But when I configure it for local switching, it will not perform the web authentication. What's the trick for getting this to authenticate with the WLC, but switch locally?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...