Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

wlc 2006 mac filtering

I would like to allow client to access wireless lan based on the client mac-address.

How I config it on WLC 2006 locally (not using radius server)? If yes, How mnay mac-address can be configured on the wlc2006?

Thanks.

Douglas

2 REPLIES
Cisco Employee

Re: wlc 2006 mac filtering

Hi Douglas,

Yes you can configure mac filtering using local database instead of Radius.

The command to configure or add mac address in mac filter list is

config macfilter add

Have a look at this link

http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/cli_4_0/clic1.htm

Also I believe max number of entries which you can add in mac filter list is 50.

HTH

Ankur

*Pls rate all helpfull post

Hall of Fame Super Red

Re: wlc 2006 mac filtering

Hi Douglas,

Just wanted to add a note to Ankurs good info;

Maximum MAC Filter Entries

The controller database can contain up to 2048 MAC filter entries for local netusers. The default value is 512. To support up to 2048 entries, you must enter this command in the controller CLI:

config database size MAC_filter_entry

where MAC_filter_entry is a value from 512 to 2048.

From this good doc;

http://www.cisco.com/en/US/products/ps6366/prod_release_note09186a0080813b1c.html#wp42756

MAC Filtering

http://www.cisco.com/en/US/products/ps6366/products_user_guide_chapter09186a00805a6ad0.html#wp1040588

Hope this helps!

Rob

185
Views
9
Helpful
2
Replies
CreatePlease to create content