cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
581
Views
0
Helpful
4
Replies

WLC 4400 IOS 6.0.182.0 issue

mayurkpatel
Level 1
Level 1

We are using WLC 4400

WLC 4400 previous running with IOS 4.2.209.0

In this IOS we were used.

WIRELESS >> Access Points >> Radios >> 802.11b/g/n >> WLAN Override

Now we are upgrad the IOS 6.0.182.0

But after this IOS upgraded we can't find this option.

WLAN Override option very much usefull for us .

pls help me

How I can enable this option ?

Thanks

Mayur

4 Replies 4

Surendra BG
Cisco Employee
Cisco Employee

there is no more WLAN Override feature after 4.2 code.. its replaced by AP-Group.. it does the same fuction as that of WLAN override, the below link will provide the config example..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

Regards

Surendra

Regards
Surendra BG

Surendra BG
Cisco Employee
Cisco Employee

sorry.. small mistake.. its 5.2 and above..

there is no more WLAN Override feature after 5.2 code.

Regards
Surendra BG

Surendra BG
Cisco Employee
Cisco Employee

sorry.. small mistake.. its 5.2 and above..

there is no more WLAN Override feature after 5.2 code.

configure AP Groups under WLAN>Advanced>AP Groups and add the APs
to the desired group to achieve the same functionality as WLAN Override.

Lemme know how this answered your question..

Regards
Surendra

Regards
Surendra BG

Thanks for given me prompt answer

This is a correct ans, resolve my problem.

Thanks again

Mayur

Review Cisco Networking products for a $25 gift card