Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC 4402: Added 4 1250 APs fine, cannot add 5th one

Please help.

WLC 4402 software version: 6.0.188, licenced for 12 APs.

I have five Cisco 1250 lightweight APs.  Added 4 successfully to the controller, the 5th one will not add and get the following errors on the controller:

*Apr 15 17:08:55.407: %CAPWAP-3-AP_DB_ALLOC: capwap_ac_db.c:145 Unable to alloc AP entry in database for 172.16.31.5:30798
*Apr 15 17:08:55.407: %LWAPP-3-AP_DB_CREATE_ERR: spam_lrad.c:5183 Unable to create an entry for AP 00:00:00:00:00:00 in the database - invalid mac address

I have done full reset of this access point, but still no luck.

5 REPLIES
Hall of Fame Super Gold

Re: WLC 4402: Added 4 1250 APs fine, cannot add 5th one

%LWAPP-3-AP_DB_CREATE_ERR: spam_lrad.c:5183 Unable to create an entry for AP 00:00:00:00:00:00 in the database - invalid mac address

If your AP does not start with a MAC address of 00:00 then it's a known bug.  This bug was rectified following the release of the 6.0.196.0 code.

Don't forget to rate our posts.  Thanks.

New Member

Re: WLC 4402: Added 4 1250 APs fine, cannot add 5th one

I have now applied code 6.0.196, but erro below is still occuring:

*Apr 16 14:05:31.056: %CAPWAP-3-AP_DB_ALLOC: capwap_ac_db.c:145 Unable to alloc AP entry in database for 172.16.31.5:30799
*Apr 16 14:05:31.056: %LWAPP-3-AP_DB_CREATE_ERR: spam_lrad.c:5186 Unable to create an entry for AP 00:00:00:00:00:00 in the database - invalid mac address

Any other ideas?

New Member

Re: WLC 4402: Added 4 1250 APs fine, cannot add 5th one

After resetting 1250 AP I also get error appearing in the WLC 4402 logs:

*Apr 16 14:35:54.824: %WEB-3-INVALID_TFTP_DNLDCODE: file_download.c:893 TFTP download failed with unknown failure code.

New Member

Re: WLC 4402: Added 4 1250 APs fine, cannot add 5th one

Habibul,

I am seeing this same error on a 1242 AP on my 4402 controller that I just upgraded to 6.0.196.  were you able to resolve your issue?

New Member

Re: WLC 4402: Added 4 1250 APs fine, cannot add 5th one

I resolved this by changing the IP the AP gets allocated.  It is has now been added to the WLC 4402.

Thanks everyone.

2585
Views
0
Helpful
5
Replies