Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC 4402 and Cisco ACS 4.1 - user exceeded max sessions

I'm having this problem for some users, but not all.

Users are logging in via web-auth on the WLC and some are getting denied because on the radius its saying they have exceeded their max-sessions. The max-sessions in the user group is set to unlimited...but with 1 allowed session per user.

Its almost like the WLC is not getting or relaying the closing of the session to the Radius.

We are running at the current firmware for the WLC. Has anyone experienced similar problems?

2 REPLIES

Re: WLC 4402 and Cisco ACS 4.1 - user exceeded max sessions

I would def. make a TAC all here. This could be the answer to some other problems we thought were EAP related. Are you running 4.1.185?

New Member

Re: WLC 4402 and Cisco ACS 4.1 - user exceeded max sessions

Yes we are running 4.1.185 firmware.

498
Views
0
Helpful
2
Replies