My WLC 4402 is running a version of 220.127.116.11 , my ACS is version 3.2. I have 1 AP connected properly to WLC and working with no problems. I configured everything just as is written in the WLC documentation to use RADIUS authentication by MAC-address of the clients connecting to my AP. The AP is a AIR-AP1252AG-E-K9 and it is normally registered in the controller , WLAN is configured , etc. RADIUS configured in the controller are prperly working and their is normal L3 connectivity in both ways. The loggin in the ACS shows strange thing , in the passed authentications there is no log that the controller was connected to the ACS and passed an authentication. In the ACS accounting log is a start , stop message for the mac-address of the client. In the controller sometimes there is message user uknown , or no message at all. In the controller RADIUS statistics there is no connection attemps for authenticaton or accounting. And after all my wireless clients are connection in the WLAN , they are recieving IP address normally. It's a really strange i will appriciate all help
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...