Hi Guys, i'm having a little trouble trying to design a new wireless deployment.
I have purchased a 4402 to control about 30 1200 series ap's accross two buildings (one LAN). The plan is to use a single ssid for the office network, and one for production. Is it possible to have ap's on different vlans (i.e one vlan per building) using these general ssid networks? I'm just unsure about how to configure the 4402 to allow for ap's in different vlans to use one ssid....
Maybe someone can give some feedback and direction, I would really appreciate it.
I believe what you are looking is that if client associate to AP1 should get Vlan X with SSID X and when client connect to AP2 in other building on same controller should get vlan Y with same SSID X correct?
If this is what your expectation is it is very well possible using AP Group VLAN feature.
This link will give you a very clear idea how it is configured and deployed, so just have a look at this link and incase you have any doubt please come back with the same
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...