Hi, looking for advice on which code to upgrade to. We have a wlc 4404 using mostly AIR-AP1231G-A-K9 access points. The current code is 126.96.36.199. We would like to use some of the 1141 APs and I understand they need at least 5.2. My plan would be to go to 6. I believe I need to go to 188.8.131.52 first and then to 6. The question would be what version of 6 would be the best? Right now 184.108.40.206 (ED), 220.127.116.11 (ED), and 18.104.22.168 (ED) are available.
Well that is a tricky question and really depends on a lot of variables. We have installs with all three versions of the software. Currently I would have to say that 22.214.171.124 is one to try. We have upgraded some clients to 126.96.36.199 because of issue with the 6.0.188..0, but again, it all depends what equipment you have and if you see any issues with the 188.8.131.52. Some people I know have just went right to the 184.108.40.206 code and have not seen any issues. The 6.x is still pretty new in my book, but like you already did..... review the caveats on the different versions and if you have a spare WLC,do some testing.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...