Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC 5508 - EAP-TLS - Windows 8.1 Third Party PKI

Hello,

Does anybody know what could prevent a Windows 8/8.1 system to connect to a WLC via EAP-TLS? Windows 7/XP do not have any problems here.The radius server accepts the request, but WIndows 8 still tries to authenticate.

Software is updated to 7.6.120.0, I tried to setup timeout values, but no success at all.

 

Did anyone have similar problems with Windows 8/81?

 

*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17 Starting key exchange to mobile 0c:8b:fd:eb:16:17, data packets will be dropped
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17 Sending EAPOL-Key Message to mobile 0c:8b:fd:eb:16:17
   state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17 Sending EAPOL-Key Message to mobile 0c:8b:fd:eb:16:17
   state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17 Reusing allocated memory for  EAP Pkt for retransmission to mobile 0c:8b:fd:eb:16:17
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17 mscb->apfMsLwappLradNhMac = 00:24:97:52:87:d6 mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 13
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17  mscb->apfMsBssid = 00:24:97:70:9a:00 mscb->apfMsAddress = 0c:8b:fd:eb:16:17 mscb->apfMsApVapId = 1
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17  dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId =
0 mscb->apfMsLwappMwarInet.ipv4.addr = -1407817979
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17  mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = -1407817773 mscb->apfMsLwappLradPort = 10367
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17 Entering Backend Auth Success state (id=6) for mobile 0c:8b:fd:eb:16:17
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17 Received Auth Success while in Authenticating state for mobile 0c:8b:fd:eb:16:17
*Dot1x_NW_MsgTask_7: Jun 24 12:43:10.604: 0c:8b:fd:eb:16:17 dot1x - moving mobile 0c:8b:fd:eb:16:17 into Authenticated state
*osapiBsnTimer: Jun 24 12:43:13.801: 0c:8b:fd:eb:16:17 802.1x 'timeoutEvt' Timer expired for station 0c:8b:fd:eb:16:17 and for message = M2
*dot1xMsgTask: Jun 24 12:43:13.801: 0c:8b:fd:eb:16:17 Retransmit 1 of EAPOL-Key M1 (length 121) for mobile 0c:8b:fd:eb:16:17
*dot1xMsgTask: Jun 24 12:43:13.802: 0c:8b:fd:eb:16:17 mscb->apfMsLwappLradNhMac = 00:24:97:52:87:d6 mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 13
*dot1xMsgTask: Jun 24 12:43:13.802: 0c:8b:fd:eb:16:17  mscb->apfMsBssid = 00:24:97:70:9a:00 mscb->apfMsAddress = 0c:8b:fd:eb:16:17 mscb->apfMsApVapId = 1
*dot1xMsgTask: Jun 24 12:43:13.802: 0c:8b:fd:eb:16:17  dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 0 mscb->apfMsLwappMwarInet.ipv4.addr = -1407817979
*dot1xMsgTask: Jun 24 12:43:13.802: 0c:8b:fd:eb:16:17  mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = -1407817773 mscb->apfMsLwappLradPort = 10367
*osapiBsnTimer: Jun 24 12:43:16.801: 0c:8b:fd:eb:16:17 802.1x 'timeoutEvt' Timer expired for station 0c:8b:fd:eb:16:17 and for message = M2
*dot1xMsgTask: Jun 24 12:43:16.802: 0c:8b:fd:eb:16:17 Retransmit 2 of EAPOL-Key M1 (length 121) for mobile 0c:8b:fd:eb:16:17
*dot1xMsgTask: Jun 24 12:43:16.802: 0c:8b:fd:eb:16:17 mscb->apfMsLwappLradNhMac = 00:24:97:52:87:d6 mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 13
*dot1xMsgTask: Jun 24 12:43:16.802: 0c:8b:fd:eb:16:17  mscb->apfMsBssid = 00:24:97:70:9a:00 mscb->apfMsAddress = 0c:8b:fd:eb:16:17 mscb->apfMsApVapId = 1
*dot1xMsgTask: Jun 24 12:43:16.802: 0c:8b:fd:eb:16:17  dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 0 mscb->apfMsLwappMwarInet.ipv4.addr = -1407817979
*dot1xMsgTask: Jun 24 12:43:16.802: 0c:8b:fd:eb:16:17  mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = -1407817773 mscb->apfMsLwappLradPort = 10367
*osapiBsnTimer: Jun 24 12:43:19.801: 0c:8b:fd:eb:16:17 802.1x 'timeoutEvt' Timer expired for station 0c:8b:fd:eb:16:17 and for message = M2
*dot1xMsgTask: Jun 24 12:43:19.801: 0c:8b:fd:eb:16:17 Retransmit failure for EAPOL-Key M1 to mobile 0c:8b:fd:eb:16:17, retransmit count 3, mscb deauth count 0

Any hint would be great .... Thank you...

Everyone's tags (1)
4 REPLIES
New Member

hi Bjoern,HOw are you authing

hi Bjoern,

HOw are you authing client against domain eg user/machine cert ... ?

Is the w8  client enrolled to Cert Server?

Does the client have it's valid certificate issued by CA?

Is clock correct?

 

regards

Dino

New Member

Hello Dino,  thanks very much

Hello Dino,

  thanks very much for your reply.

  The client uses a machine-certificate, the PKI is not a microsoft one, but a third party PKI.   The certificate is fresh and valid, the root-cert is installed and checked to be validated against it for the login.

Clock is correct too. The same setup works flawlessly in Windows 7 and XP.

EKU is set on the certificate (1.3.6.1.5.5.7.3.2)

I suspect the cert-setup itself, but don't get a clue where this might stuck...

Björn

 

 

 

 

 

Cisco Employee

checkhttp://support.microsoft

check

http://support.microsoft.com/kb/2749073

New Member

thanks, but we're on 7.6.120

thanks, but we're on 7.6.120.0, so nothing newer possible. Additionaly Wired Authentication over the same mechanism works flawlessly...

533
Views
0
Helpful
4
Replies