Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WLC 5508 HA Problem Soft.ver 7.4.100

 

Dear Support,

we are using two WLC 5508 software ver.7.4.100 with first 50AP license and in the next day we add 50AP license again to the primary WLC. when we activate HA base in the following guiden http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html but when we doing test the failover we found a couple log message on the Secondary WLC like below and not for long time all AP on the Secondary WLC was drop off. 

1. DP Critical Error

2. *RRM-DCLNT-2_4: May 23 07:43:53.204: #RRM-3-RRM_LOGMSG: rrmTables.c:682 RRM LOG:  Could not retrieve  RRM Coverage Measurement DataKey BSSID:34:db:fd:dd:3e:20,Key SlotId:0

*RRM-DCLNT-2_4: May 23 07:43:53.164: #RRM-3-RRM_LOGMSG: rrmTables.c:682 RRM LOG:  Could not retrieve  RRM Coverage Measurement DataKey BSSID:34:db:fd:dd:3e:20,Key SlotId:0
*RRM-DCLNT-2_4: May 23 07:43:52.854: #RRM-3-RRM_LOGMSG: rrmTables.c:682 RRM LOG:  Could not retrieve  RRM Coverage Measurement DataKey BSSID:2c:36:f8:72:fc:c0,Key SlotId:0

 

I also send a complete log for both problem above and enclose it with pdf file. need you advice and assistance,

 

regard, afriansyah


 

1 REPLY
Hall of Fame Super Gold

Duplicate post.  Go here:

Duplicate post. 

 

Go here:  https://supportforums.cisco.com/discussion/12224406/wlc-5508-ha-problem-softver-74100

70
Views
0
Helpful
1
Replies
CreatePlease to create content