i have 12 locations all connected to internet via T1 and connected to HQ via VPN all sites have asa 5505 and HQ has asa 5510
we are adding another building at a site and it will have an asa5510 with its own internet connection. VLAN 1 that is behind this new asa5510 will be connected to one of the site's VLAN1. the VLANs that will be behind this new asa5510 will all be guest (apparements 1 VLAN per appartemnt)
the internet connection will be a 100Mbps connection.
now i think that is all the basic info so here is my quetion i want to setup the 5508 at HQ so we can deploy wireless at all sites including the appartmens.
is this possable? i want to have all appartment traffic to go to their asa5510 internet not through HQ
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...