Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WLC AND AIRONET 1240 LWAPP CONFIG

Hi all, Can anyone tell me what I need to do to configure my 1240ag access points to work with my wlc using lwapp.

Also how reliable are the wlc's should you use a backup wlc on each site ?

1 REPLY
Hall of Fame Super Silver

Re: WLC AND AIRONET 1240 LWAPP CONFIG

Your 1240ag must be an LWAP. Look at the back of the AP and check the model. If you see AP1242 then no, but if you see LAP1242 then all you need to do is stage the LWAP to the WLC.

Backups depend on your policies and how important the wireless will be to your byusiness.

Read this doc to help you understand better. Hope this helps:

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_example09186a0080665cdf.shtml

-Scott
*** Please rate helpful posts ***
312
Views
0
Helpful
1
Replies
CreatePlease login to create content