Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

WLC and IPv6

Hi All,

has anybody experiences with WLC and IPv6? I have activated the Check Box for IPv6 Support, but it does not work. Regards, Michael

2 REPLIES
Cisco Employee

Re: WLC and IPv6

Hi ,

Have you configued uplink router/sw to support ipv6 ; the sample config would look like this

ipv6 unicast-routing

interface FastEthernet0/0.6

encapsulation dot1Q 56

ip address 10.50.56.1 255.255.255.0

ip access-group GNS2 in

ip access-group GNS2 out

ip helper-address 10.50.1.21

ip pim sparse-dense-mode

ip multicast ttl-threshold 1

no snmp trap link-status

ipv6 address 2006::/64 eui-64

ipv6 address autoconfig

ipv6 enable

!

let me if this works for you or not

regards

Seema

New Member

Re: WLC and IPv6

Hi Seema, thanks for your response. Unfortunately the Customer uses Alcatel Switchrouters for his Infrastructure, but IPv6 runs excellent. Only the Bridging above the WLC does not work. Any more hints? Best Regards, Michael

316
Views
0
Helpful
2
Replies
CreatePlease to create content